The Peakyshielder: Clip your face shield to your cap for comfort

Workwear. Leisurewear. A comfortable alternative to a regular face shield.

A comfortable, additional layer of protection for those who work on production lines, for customer-facing staff in the hospitality and retail sectors who have to wear head-wear as part of their uniform, and for individuals who find mask wearing inhibiting.

Designed to clip to the peak of a bump cap, a standard baseball cap or sports visor, the Peakyshielder is an ultra-lightweight, high-quality, British-made personal protection product. The Peakyshielder comprises a set of re-usable 3D printed clips and a re-usable and replaceable shield.

The Peakyshielder covers the face from the forehead to below the chin. Created for use in non-medical settings, the Peakyshielder is roomy enough to fit over your normal glasses or safety goggles, and can be used with a standard face mask should greater levels of protection be required.

Charlie Modelling the Peakyshielder
Corinne wears the Peakshielder with sun visor
Charlie wears the Peakyshielder with Bump Cap

“For those working in an active environment, or for someone with a hidden disability that finds face mask wearing difficult, the Peakyshielder, with its full-length shield covering the eyes, nose and mouth, offers an alternative form of protection from airborne spray and splash.“

Peakyshielder logo Square-01
Duncan Hutchinson Creator, The Peakyshielder

Custom-Branded Face Shield for Production Line and Customer Facing Staff

The Peakyshielder is a full face shield, helping to protect the eyes, nose and mouth from airborne splash and spray:

– Multi-use, ultra-lightweight, ergonomic and secure

– Offers clear vision and long-term comfort

– Rounded corners provide freedom of movement of the head and prevent injuries.

– Manufactured in the UK and made from high quality, biocompatible, durable material

– Two clip types available – order for standard baseball cap (also fits most sports sun visors) or for standard bump caps

– Send your logo for inclusion at no extra cost*

– Advertised price excludes VAT and P&P. Baseball cap, bump cap or sports sun visor not included.

*For orders of 50 or more only. Logo requires submission of a .dwg file or .eps file. The logo engraving area does not exceed 10mm x 10mm on baseball cap clips and 20mm x 20mm on bump cap clips.

Baseball Cap Clips and Shield: £2.65/set. Minimum Order: 50 sets

Peakyshielder baseball cap clips

Bump Cap Clips and Shield: £5.58/set. Minimum Order: 50 sets

Bump Cap Clips Peakyshielder Web

Peakyshielder Assembly Instructions

The Peakyshielder comes ready to assemble. Each unit comprises two clips and a pre-cut clear PET sheet.

1.  For a baseball cap or sports visor:

Select the appropriate holes in the top of the sheet to ensure the brim of the peak is fits tight against it when the clips are in place

Push the billet of the clips through the holes in the visor sheet, slotting the edge of the sheet into the groove. The clips are right and left handed, so you need to ensure the clip beaks are facing inwards, with logos uppermost, and the sheet slots face outwards when you shape the visor around your cap peak

Position your clips either side of your cap peak. Slide the gripper groove on the clip beaks onto the peak and pull backwards until the visor sheet sits tight against the peak brim. You should not have gaps

For a bump cap:

Select the appropriate holes in the top of the sheet to ensure the brim of the peak is fits tight against the sheet when the clips are in place

Push the billet of the clips through the holes in the visor sheet, slotting the edge of the sheet into the groove. The clips are left and right handed. You need the logo to appear on the outside when you shape the visor around your cap peak

Position your clips either side of your bump cap. Slide the gripper groove on the cap side panel (not the peak) and pull backwards until the visor sheet sits tight against the peak brim. You should not have gaps

Peakyshielder Cleaning Instructions

Wash your hands with soap and water or hand sanitiser

Remove your cap and remove the clips and shield from the brim. Try not to touch the visor to avoid possible contamination from spray droplets

Wash the clips with soapy water or disinfectant solution. Wipe down the visor sheet with warm soapy water and dry with a towel. Do not use harsh chemicals on the visor sheet if you intend to reuse the sheet

Dispose of your Peakyshielder responsibly. Your clips can be recycled